If the issue persists, please contact us for support. Its a good idea to replace the batteries soon during this alerting condition. Low battery status is generated when the remaining battery life of a sensor is less than 25. The battery charge indicator will improve gradually by repeating this process several times. A daily alert is generated when a sensor transmits a low battery status for 10 consecutive check-ins.Once the battery charge is almost depleted, power off the console by holding down the POWER Button for three seconds, then select "Power Options" > "Turn Off." Leave the console alone for at least 30 minutes. The indicator maintains a accuracy up 0.03 degrees even with synchro or resolver phase shifts up to 45 degrees over a frequency range of 47-300 Hz.The remaining battery life must be depleted as much as possible.Afterward, disconnect the AC adapter and allow the console to display the HOME Menu for approximately three to four hours. ![]() Once the battery is fully charged, leave the console alone for one hour with the AC adapter still connected to it.If the battery charge indicator does not reach 100%, simply allow the console to charge for approximately three hours.Connect the AC adapter directly to the console until the battery is fully charged. When the total supply voltage is large enough to cause the zener to regulate (>7V), the COMMON voltage will have a low voltage coefficient (0.Set the Auto-Sleep mode to "Never" for "Playing on Console Screen" and for "Connected to TV.". ![]() The steps below apply to system menu version 3.0.1 or higher.
0 Comments
Leave a Reply. |